The washing process of the fully automatic washing and stripping dual-purpose machine is completed under the comprehensive action of water, detergent, mechanical force, temperature and other factors.
In daily life, the body's own secretions (usually adults secrete 6-12 grams of dirt per day) and contact with the environment can cause clothing to become dirty. According to their properties, they can be divided into solid particles, oils, and water-soluble substances. These dirt generally do not adhere solely to fabrics, but form complexes or compounds that adhere to clothing, which is a mechanical attachment; In addition, there is mutual attraction between tiny particles, which promotes chemical binding between dirt and fabric molecules. In short, there are various binding forces between the dirt on clothing and the fabric.
The washing process of the fully automatic washing and stripping machine is the process of breaking these bonds, weakening their suction, and causing them to detach from each other. Due to the timed positive and negative high-speed rotation of the wave plate, drum, or mixing wing, the washing liquid is violently stirred, and the clothes continuously rotate and roll up and down with the water flow (in a drum washing machine, the clothes are constantly thrown down from a certain height and form rotation). There is an impact and rubbing between clothes, between clothes and water flow, and between clothes and cylinder walls. Under the combined effect of mechanical stirring, throwing, kneading, impact, and the wetting, emulsification, and dispersion of detergents, large-scale washing equipment gradually pulls off dirt such as oil and dust from clothing and gets them into the water. After rinsing with clean water, it will be very clean. Finally, in the dehydration tank, the clothes can be shaken dry by centrifugal force and then taken out for drying or dried with a dryer.
The popularity of fully automatic washing and stripping machines is constantly increasing, especially for many enterprises, where large washing equipment undertakes a large amount of fabric washing every day. If there is a problem with the device, it will have a significant impact on the daily operation of the enterprise. How can we avoid some incorrect methods of operating large washing equipment?
Precautions for using the fully automatic washing and stripping dual-purpose machine: It is best to wash fabrics separately. Large items such as bed sheets and blankets should be shaken to avoid entanglement, which may affect the uniform distribution effect and subsequent actions. The load capacity of the equipment should be controlled between 80% -95% as much as possible, because if the quantity is too small, it will not only waste energy but also be difficult to distribute evenly. If the quantity is too large, it will shorten the service life of main components such as appliances and springs. The pressure of compressed air in large washing equipment should be between 0.4 and 0.6 Mpa, and the air source processor should be refueled and drained, otherwise the machine cannot work properly. To stop a certain action during manual operation, press the status key. If an automatic program is used to complete the washing program, the washing effect is related to various factors, such as the amount, size, type, and degree of dirt of the washing material. It is recommended that users explore a set of ideal programs based on their actual situation, or manually operate to determine the duration of various actions, and modify the program through a computer to achieve the best use effect.
The fully automatic washing and washing dual-purpose machine needs to soak and wash the clothes first: after soaking the clothes, dirt is easily dissolved in the washing solution, making washing easier. In addition, considering the energy-saving of the equipment during the washing process, it is recommended to choose different washing procedures based on the degree of dirt on the clothes, and choose a fast washing procedure for less dirty clothes.
Rated capacity for washing clothes: The fully automatic washing and stripping machine is labeled with the maximum weight for a single wash. The normal washing weight is 80% of the rated capacity, which means that a 100kg device can wash 80kg of clothes at once. Some people, in order to save money, even though they wash a lot of clothes, still set the water level of the equipment at a low water level. With less water and more clothes, clothes cannot fall or fall, and there is no friction between clothes in the washing machine, resulting in clothes that cannot be cleaned. So when using a fully automatic washing and stripping dual-purpose machine, it is necessary to operate according to the instructions, so as to better achieve the washing effect.