1. Learn to clean large industrial washing machines reasonably. After each cleaning, the detergent box, door sealing ring, and all components inside the drum inside the machine should be cleaned, and then the machine door should be closed after drying inside the machine.
2. We also perform antivirus cleaning on large industrial washing machines, which is very simple to operate. Simply put professional washing machine cleaning agents into the large industrial washing machine, fill it with water, set it at the standard cleaning time, stir it thoroughly, add water to clean, and then clean it.
The hygiene conditions of the laundry room storing large industrial washing machines cannot be ignored. In addition to regular cleaning, it is more important to ensure its internal dryness and ventilation. A clean, hygienic, and dry environment is more suitable for storing large industrial washing machine spaces.
What are the operating steps for a large industrial washing machine?
1. Daily routine
Check if daily maintenance and preparation are completed.
Open the hot and cold manual valves to supply water to the machine.
Open the steam valve and deliver the steam to the machine.
Open the air compressor valve and deliver compressed air to the machine.
Prepare detergents such as soap or laundry detergent.
Push on the main power switch to power the machine.
After completing the above tasks, the automatic washing machine can be operated and used, which can be divided into two types: manual operation and automatic operation.
2. Automatic operation
Open the front door, put the pre weighed sorted clothes into the laundry tank according to the rated capacity of the machine, and then close the front door.
Press the computer programming button to find the automatic washing program that needs to be washed. At the same time, you can select the washing time, timing, and desired washing temperature.
After selecting the automatic program, press the automatic washing button to start automatic washing. The machine will automatically add water and pour water. After 1.2 minutes, the water adding valve will be automatically closed and the initial washing will end after 1.5 minutes of automatic drainage.
Then automatically close the drain valve and heat the water. At that time, please add soap solution or soap powder to the soap solution tank until automatic cleaning, automatic reporting, and automatic shutdown occur. You can open the front door to remove your clothes.
Then put the pre weighed sorted clothes into the laundry white tank. If the clothes that need to be washed now are basically the same as last time, just press the automatic button, and the second washing program will start. Don't forget to wash it automatically with soap or laundry detergent immediately after one and a half minutes.
3. Manual operation
Firstly, prepare for the daily routine 1-6 tasks, and then perform the following manual cleaning.
Open the front door according to the rated capacity of the machine, put the pre weighed classified clothes into the laundry tank, and then close the front door.
After pressing the manual button, you can press the water addition, washing, and other buttons to manually wash at will.
Note: When manually operating a fully automatic washing machine, the following points should be noted:
When manually operating, it is necessary to select the washing water level and temperature to ensure the proper effect of washing clothes.
Before manual washing, it is important to have a better understanding of the washing procedure and requirements, otherwise you will not lose anything.
Before starting high dehydration, be sure to check if the water level has reached the medium dehydration level. When the washing cylinder rotates clockwise, it is best to open the center release button, which can achieve even distribution of water and achieve balance of the clothes in the later stage. Run evenly for about one minute, and the mother turns on the medium and high speed dehydration runs. If the machine oscillates more than usual in the later stage of uniform distribution operation (referring to nearly one minute), it is best to close the middle release button, add water again, restart washing operation, and restart uniform distribution to effectively ensure the balance of medium and high speed dehydration. (i.e. reducing vibration).
When the high-speed dehydrator button is turned off, there is still significant inertia at high speed, which takes one minute. The automatic braking speed is applied, the door is opened, and clothes are loaded and unloaded.
4. Work completed
Turn off the main power supply
Close the cooling and hot water valves.
Close the steam valve
Turn off the compressed air source
Open the front door and loosen the sealing gasket
Clean and maintain the automatic washing machine.
Meanwhile, it should be noted that large automatic industrial washing machines, also known as automatic washing machines, are a new type of washing equipment product that integrates industrial washing machines and dehydrators. Due to the characteristics of the product, it is necessary to operate according to the above methods and not take any abnormal measures to avoid machine malfunctions caused by improper operation.