I believe everyone is familiar with industrial water washing machines, so here is a detailed analysis of the washing tips for their equipment:
When using an industrial water washing machine for washing, temperature control is crucial. Excessive temperature can easily cause color matching. If color matching occurs, it is necessary to quickly shake the clothes up and down and wash them in cold water.
Special attention should also be paid to clothing made of different materials. For example, pure cotton plush clothing needs to be cold soaked and pre washed before washing, then brushed with soap on the local area, washed at room temperature with laundry detergent for about 15 minutes, and finally rinsed with warm and cold water, dehydrated and dried.
Before washing, denim clothing needs to be cold soaked, followed by soap brushing and industrial washing with a washing machine. The washing temperature is about 75 degrees Celsius, and the time is 25 minutes. Finally, it needs to be rinsed and dried.
After working for 2 to 3 months, the triangular belt of the industrial water washing machine should be re tightened because the new belt has a certain elasticity and becomes a bit loose after a period of use. If not re tightened, it will easily slip and affect the use of the equipment.
Regularly check the inlet filter valve of the industrial water washing machine to see if it is blocked by debris. If the industrial water washing machine stops during dehydration, please check if the probe of the shock switch is in the correct position.
When the equipment is unloaded, the horizontal distance between the probe and the outer cylinder is approximately 4-9mm. If the drainage outlet of the washing machine is blocked, frequent shutdowns during dehydration may occur. In order to ensure the normal and safe operation of our industrial washing machine, it is necessary to ensure smooth drainage.
The triple filter for industrial water washing machine air source treatment should be regularly drained of water, and the oil cup of the oil mist collector should be refilled with oil in a timely manner. The specification of the mechanical oil used should be 10 #. Regularly check whether the lower drain of the main bearing seat is unobstructed to ensure that there is no water accumulation in the bearing, which can extend the service life of the bearing.
Although the vibration of the washing machine is minimal, it can also cause loosening of bolts and connectors. Therefore, it is necessary to regularly check whether bolts, screws, and other connectors are loose to ensure safety during operation.
The routine maintenance and upkeep of industrial water washing machines can improve the efficiency of washing equipment, reduce the frequency of malfunctions, thereby extending the service life of the equipment and ensuring its safe operation.