Before using a fully automatic industrial washing machine, it should be installed smoothly, and both water and electricity connections should be reasonable. The inlet and outlet pipes should be consistent with the interface of the fully automatic industrial washing machine, and safety issues should also be noted during use. Usually, fully automatic industrial washing machines have instructions for use, which are very simple to operate. Below, we will introduce the installation and use of fully automatic industrial washing machines:
In installation, the first step is to determine the location of the fully automatic industrial washing machine, while also considering the issues of water supply and drainage, such as the location of transportation channels and steam intake. Due to the heavy weight of industrial fully automatic washing machines, they must be placed on a solid foundation and kept level with the ground, without tilting. On the wiring, it is necessary to connect the three-phase power line and the neutral line. If there is no steam condition, the air inlet can be blocked. If steam function is needed, indicator signs should be installed in a relatively obvious position outside the fully automatic industrial washing machine, and safety devices should be installed around it.
After the machine is installed stably, it is also necessary to do a good job during use. For example, before using a fully automatic industrial washing machine, it is necessary to check whether the internal door is locked to avoid any accidents. Clothes washed with fully automatic industrial washing machines should not be exposed to direct sunlight or baked in the stove.
A fully automatic industrial washing machine can be used for many years if properly maintained during use. On the contrary, if used improperly, it will reduce the service life of fully automatic industrial washing machines. Therefore, when purchasing fully automatic industrial washing machines, enterprises should not only choose good quality, but also pay attention to the use method to make the machine's service life longer.
For commonly used fully automatic industrial washing machines, let's talk about the washing methods:
1. How much laundry is determined for fully automatic industrial washing machines:
The amount of clothing that can be put into a fully automatic industrial washing machine at once depends not only on the rated washing capacity of the machine, but also on the material, size, and water absorption rate of the clothes being washed. When washing clothes, special attention should be paid to reducing the amount of large and absorbent clothes at once. This is not only beneficial for washing, but also for the normal operation of fully automatic industrial washing machines, extending their service life.
2. Control of washing water consumption for fully automatic industrial washing machines:
The amount of water injected during washing should be considered based on the weight of the clothing and its water absorption. The amount of water used is based on ensuring that clothing floats well. If too much water is added, it will dilute the concentration of the detergent, affect the washing effect, and also cause water to splash and overflow. If too little water is added, the clothes cannot float, and during washing, the clothes are prone to clumping and twisting, which not only affects the washing effect but also makes it easy to make clothes.
3. Selection of washing time for fully automatic industrial washing machines:
The material and degree of dirt of clothing, as well as the type of fully automatic industrial washing machine, are the main factors that determine the washing time. In addition, water temperature, detergent concentration, and detergent performance can also affect the length of washing time. The wave wheel fully automatic industrial washing machine can achieve satisfactory washing results for cotton fabrics with general dirt levels after washing for about 10 minutes; For chemical fibers and blended fabrics, the washing time can be slightly shorter, usually 6-8 minutes; For fabrics such as silk, wool, and yarn, the washing time should be strictly controlled and a reasonable washing method should be selected. The washing time of drum type fully automatic industrial washing machines is generally longer than that of wave wheel type fully automatic industrial washing machines.
4. Washing solution temperature control:
The temperature of the washing solution has a direct impact on the washing effect, and it should be reasonably controlled. When choosing the temperature of the washing solution, in addition to considering the type of fabric, the material of the inner drum and impeller of the fully automatic industrial washing machine, as well as the type of detergent, should also be considered. The recommended temperature for washing solution for general needle cotton fabrics is 60-70 degrees Celsius, for polyester cotton fabrics it is 40-60 degrees Celsius, for woolen fabrics it is 40-50 degrees Celsius, for silk and satin fabrics it is 30-50 degrees Celsius, and for vinylon, chloroprene, and polypropylene fabrics it is recommended to use cold water at around 20 degrees Celsius.